EOC2611P is a long range outdoor wireless Access Point / Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with Super G. With dual polarization antenna, it features high transmitted output power and high receivable sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points to get a more stable wireless connection. It also reduces the expense of equipment in the same environment. With IPx4 protection, it can provide effective in keeping out water.

It supports distance control by 1km to 30km and RSSI indicator which enables the best transmit and receive signals for traffic communication. This product comes with PoE injector for building in outdoor environment easily.

To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128‐bit WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you select exactly which stations should have access to your network. In addition, the User Isolation function can protect the private network between client users.

The attractive design, high performance, and array of features make EOC2611P a suitable wireless solution for your residence or office.

Antenna

Package Content

One 802.11b/g Long range AP/CB (EOC2611P)
One PoE injector (EPE-1212)
One Power Adaptor
One CD with User's Manual
One QIG
One Metal strap
One Special screw set

Features :

Wireless

• 2.4GHz It works in 2.4GHz frequency spectrum
• High output power Transmit high output power programmable for different country selections
• High Data Rate High speed transmitting rate up to 108Mbps with Super G, support large payload such as MPEG video streaming
• Multifunction application Access Point/Client Bridge/Client Router/WDS Function
• Long range transmitting Transmit power control and distance control (ACK timeout)
• Narrow Bandwidth Provide 5MHz/10MHz/20MHz bandwidth selection
• Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build‐up easier.

LED indicators have the best transmit and receive signal for traffic communication

• Multiple SSID 4 SSID supported. Each SSID can set itself wireless or WAN access setting.
• QoS(WMM) Enhance performance and density

Networking

• PPPoE Point‐to‐Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
• PPTP Point‐to‐Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
• VPN Pass Through

Security

• 802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
• MAC address functions MAC address filter (AP mode)
• 802.1x IEEE802.1x Authenticator
• Station isolation L2 Isolation

Management

• Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
• Reset & Backup Reset to factory default. User can export all setting into a file via WEB
• Ping & Trace Route Built‐in PING function & Trace Route function in Web GUI
• MIB MIB I, MIB II(RFC1213) and Private MIB
• SNMP V1, V2c